,

Reliable dredge valves to upgrade dredgers

Reliable gate valves to upgrade dredgers

Dredge Valves

Dredge Yard has successfully delivered dredge valves of sizes 600, 700 and 750 mm internal diameter, which were needed for the discharge pipeline on board of 2 trailing suction hopper dredgers.

Dredge gate valves are highly sophisticated components and for proper functioning and maintenance, it is very important to select the right type with the right material and pressure handling capability for long life.

Design

All the dredge valves have been designed by Dredge Yard’s team of engineers using the latest design software. Fabrication was done in-house at Dredge Yard’s production facilities.

One of the special features of the valve is the steel reinforced rubber seals making the seal very durable, making it easy to cope with the large amount of abrasive slurries and to be able to open and close smoothly in tough working conditions.

The body of the dredge valve was fabricated from high tensile steel and the valve’s gate is made of corrosion resistant and hardened steel, protecting it against the rust and wear. For conservation of the outer surface of the valve a high quality marine type paint was applied to protect it against corrosion.

Inspection

The inspection hole placed in the both sides of the valve’s body, allows for easy inspecting the dredge valve without dismantling it.

These types of dredge valves can be produced for three different working duties varying between 10, 20 and 30 bar according to the customer’s requirements and applications.

The dredge valves had to be delivered in a short time for replacement of an existing valve during maintenance of the dredgers.