DREDGER MAIN PARTICULARS
| Type of dredger | Cutter Suction Dredger | |
| Pontoons | 3 dismountable pontoons | |
| Transport | Inside 4 containers | |
| Suction pipe diameter | 350 mm | 14 inch |
| Discharge pipe diameter | 300 mm | 12 inch |
| Suitable for dredging material | clay, medium sand and coarse sand | |
| Dredging depth at 45 degrees | 8.0 m | 26.0 ft |
| Production | 370 m³/hr |
DREDGE POWER UNIT
| Engine power | 310 kW | 415.7 hp |
| Engine speed | 1,800 – 2,100 rpm | |
| Cooling system | Seawater cooling |
DREDGER MAIN DIMENSIONS
| Length overall including ladder | 21.5 m | 70.5 ft |
| Number of pontoons | 3 dismountable | |
| Length over pontoons | 15.2 m | 50.0 ft |
| Width overall during operation | 5.3 m | 17.4 ft |
| Width overall during transport | 2.3 m | 7.5 ft |
| Depth, main pontoon | 1.6 m | 5.2 ft |
| Depth, side pontoon | 1.25 m | 4.1 ft |
| Design draught | 0.75 m | 2.5 ft |
DREDGE PUMP
| Type | DY300-300 | |
| Configuration | Single-stage centrifugal pump | |
| Position | Inboard, mid-pontoon | |
| Suction diameter | 300 mm | 12 inch |
| Discharge diameter | 300 mm | 12 inch |
| Spherical passage | 150 mm | 6 inch |
| Impeller number of vanes | 3 | |
| Drive Motor power | 310 kW | 415.7 hp |
| Drive | Direct drive through a single-stage gearbox | |
| Pump speed | 650 – 800 rpm | |
| Wear material | Wear resistant cast iron | |
| Gearbox | Single-stage; vertical offset | |
| Shaft seal | Mechanical seal |
DREDGE CUTTER HEAD
| Type | DY900-C Multi-purposed | |
| Configuration | Crown type interchangeable teeth | |
| Cutter diameter | 0.9 m | 3.0 ft |
| Cutter motor power | 40 kW | 60 hp |
| Cutter motor speed | 0 – 40 rpm | |
| Cutting system | Replaceable (narrow, pick-point, chisel type) |
DREDGING WINCH
| Type of winch | Drum winch | |
| Movement | Swing 35 degrees to both sides | |
| Number of winches | 2 units | |
| Wire pull | 40 kN | 8,820 lbs |
| Hauling speed | 0 – 15 m/min | 0 – 49 ft/min |
| Drive | Hydraulic motor | |
| Wire diameter | 16 mm | 0.63 inch |
| Swing range at min depth | 23.9 m | 78.3 ft |
| Swing range at max depth | 19.9 m | 65.3 ft |
LADDER HOISTING WINCH
| Type of winch | Drum winch | |
| Number of Winches | 1 unit | |
| Wire pull | 40 kN | 8,820 lbs |
| Hauling speed | 0 – 15 m/min | 0 – 49 ft/min |
| Drive | Hydraulic motor | |
| Wire diameter | 16 mm | 0.63 inch |
| Anchor weight | 230 kg | 507 lbs |
FUEL
| Fuel type | Diesel fuel | |
| Tank capacity | 3,500 liters | 925 gal |
OPERATING CABIN
| Total area | 3.0 m² | 32.3 sq-ft |
| Cooling | Ventilation fan (a/c optional) | |
| Lights | 2x exterior light and 2x flood light | |
| Additional | Screen wipers | |
| Instrumentations |
|
