DREDGER MAIN PARTICULARS
| Type of dredger | Cutter Suction Dredger | |
| Pontoons | 3 dismountable pontoons | |
| Transport | Dismountable on flat tracks | |
| Suction pipe diameter | 400 mm | 16 inch |
| Discharge pipe diameter | 350 mm | 14 inch |
| Suitable for dredging material | clay, medium sand and coarse sand | |
| Dredging depth at 45 degrees | 9.0 m | 29.5 ft |
| Production | 460 m³/hr |
DREDGE POWER UNIT
| Engine power | 447 kW | 600 hp |
| Engine speed | 1,800 rpm | |
| Cooling system | Seawater cooling |
DREDGER MAIN DIMENSIONS
| Length overall including ladder | 22.9 m | 75.1 ft |
| Number of pontoons | 3 dismountable | |
| Length over pontoons | 15.7 m | 51.5 ft |
| Width overall during operation | 5.6 m | 18.4 ft |
| Width overall during transport | 2.5 m | 8.2 ft |
| Depth, main pontoon | 2.0 m | 6.6 ft |
| Depth, side pontoon | 1.5 m | 4.9 ft |
| Design draught | 1.0 m | 3.3 ft |
DREDGER PUMP
| Type | DY350-350 | |
| Configuration | Single-stage centrifugal pump | |
| Position | Inboard, mid-pontoon | |
| Suction diameter | 350 mm | 14 inch |
| Discharge diameter | 350 mm | 14 inch |
| Spherical passage | 200 mm | 8 inch |
| Impeller number of vanes | 3 | |
| Drive power | 447 kW | 600 hp |
| Drive | Direct drive through a single stage gearbox | |
| Pump speed | 400 – 600 rpm | |
| Wear material | Wear resistant cast iron | |
| Gearbox | Single-stage, vertical offset | |
| Shaft seal | Mechanical seal |
DREDGER CUTTER HEAD
| Type | DY1100-C Multi-purposed | |
| Configuration | Crown type interchangeable teeth | |
| Cutter diameter | 1.1 m | 3.6 ft |
| Cutter motor power | 57 kW | 76 hp |
| Cutter motor speed | 0 – 35 rpm | |
| Cutting system | Replaceable (narrow, pick-point, chisel type) |
DREDGING WINCH
| Type of winch | Drum winch | |
| Movement | Swing 35 degrees to both sides | |
| Number of winches | 2 unit | |
| Wire pull | 40 kN | 8,820 lbs |
| Hauling speed | 0 – 15 m/min | 0 – 49 ft/min |
| Drive | Hydraulic motor | |
| Wire diameter | 16 mm | 0.63 inch |
| Swing range at min depth | 25.5 m | 83.6 ft |
| Swing range at max depth | 21.0 m | 68.9 ft |
LADDER HOISTING WINCH
| Type of winch | Drum winch | |
| Number of Winches | 1 unit | |
| Wire pull | 40 kN | 8,820 lbs |
| Hauling speed | 0 – 15 m/min | 0 – 49 ft/min |
| Drive | Hydraulic motor | |
| Wire diameter | 16 mm | 0.63 inch |
| Anchor weight | 300 kg | 661 lbs |
DREDGE SPUDS
| Total spud length | 11.4 m | 37.4 ft |
| Outer spud diameter | 355.6 mm | 14 inch |
| Total spud weight | 1,550 kg | 3,417 lbs |
| Hydraulic cylinder force | 60 kN | 13,230 lbs |
| Cylinder stroke | 1.75 m | 5.74 ft |
FUEL
| Fuel type | Diesel fuel | |
| Tank capacity | 8,000 liters | 2,114 gal |
OPERATING CABIN
| Total area | 3.0 m² | 32.3 sq-ft |
| Cooling | Ventilation fan (a/c optional) | |
| Lights | 2x exterior light and 2x flood light | |
| Additional | Screen wipers | |
| Instrumentations |
|
